Since CNC machine tools are not directly controlled by people, but are affected by programs, Dongguan CNC machining center reminds everyone that many technicians are negligent when operating machine tools, resulting in program input, editing, and correction errors, resulting in tool entry errors, which are often very serious. Knife collision accidents are prone to occur. Then Dongguan CNC Machining Center Tinheo Prototype will give you some popular science on how to avoid this kind of tool collision accident.
In fact, there are traces of knife collision incidents. After actual testing, it was found that since the maintenance of the machining center is difficult and expensive, and the processing parts mainly rely on the accuracy of the machine tool, once an equipment accident occurs, the accuracy of the machine tool will be seriously reduced. In fact, the method to avoid it is very simple. Before simulating processing, you should first confirm whether the machine tool is locked. Next, check whether it has returned to the reference point after dry-running the simulation, because when checking the program, the coordinates do not match the actual position. At this time, the method of returning to the reference point must be used to ensure coordinate consistency. When running the specified line, the coordinate system such as G54 and the length compensation value of the tool must be called first on the Tinheo CNC machining center. Because the length compensation value of each knife is different, if it is not called, it may cause knife collision.
In summary, mastering programming skills is a prerequisite. You must use various methods to verify the program and run the settings correctly. Be careful, conscientious, and focused during operation to avoid unnecessary mistakes, which can effectively avoid the occurrence of knife collision. , better protect CNC machine tools.
Tinheo Molding is a prototype custom processing manufacturer and one of the best among many. The business undertakes home appliance prototypes, robot prototypes, electronic and digital product prototypes, hardware parts processing, lamination processing, etc. Our company has a total of 35 four-axis linkage and five-axis linkage machines, which can process prototypes with a length of 2 meters. During the operation process, the company strictly implements the ISO9001 quality management system and EOS quality management system, produces in accordance with the international ROHS environmental quality standards, and is people-oriented. It has gradually established a good reputation throughout the country and established a complete after-sales service system. We look forward to your visit. Looking forward to working with you.
